LONGSHINE MICROSYSTEM, INC.

LCS-6610HX Rev. 2

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two MFM ST506/412 drives

Floppy drives supported: None

Max. Heads and Cyls.: 16 Heads and 1024 Cyls.

[Image]

                        CONNECTIONS

                  Function                      Location

  4-pin connector-drive active LED                CN1

  20-pin data cable connector-drive 0             CN2

  20-pin data cable connector-drive 1             CN3

  34-pin control cable connector-hard drive       CN4

                        USER CONFIGURABLE SETTINGS

              Function                     Location           Setting

  »    Hard drive port address is            JP4               open
       1F0-1F7h

       Hard drive port address is            JP4              closed
       170-177h

  »    BIOS other than DTK on host           JP5              closed

       DTK BIOS on host                      JP5               open

  »    LCS-6610HX is not grounded to         JP7               open
       host

       LCS-6610HX is grounded to             JP7              closed
       host

  Note:Jumper JP1, JP3, and JP8 are reserved and must be left "open."JP9
  is reserved and must be left pins 1 & 2 "closed."This controller
  contains no on-board software.